Skip to content

To report a serious incident to DEM, as required by Section 85(2) of the Petroleum and Geothermal Energy Act 2000, licensees should contact the serious incident reporting hotline on: (08) 8463 6666. For more information please visit the Compliance and Monitoring webpage | DEM-ERD has just released the first “Basin in a Box” data-package covering the Simpson and Pedirka Basins. The dataset is available via the “Data and Publications” page. Each package is a consolidated set of seismic and well data to facilitate new ventures and exploration assessments of frontier basins in South Australia. Data releases for other frontier basins will follow.

To bring Australia’s coordinates into line with those from global satellite positioning systems, Australia is changing to a new official national datum called the Geocentric Datum of Australia 2020 or “GDA2020”.


The Department for Energy and Mining (DEM) transitioned its systems from GDA94 to GDA2020 and its associated Map Grid (MGA2020) over the weekend of 10th and 11th August 2019. From that point, and subject to the practical and pragmatic approach outlined below, GDA2020 will be the required operational datum for all South Australian petroleum-related activities.

To assist companies with the management of this transition, the Energy Resources Division (ERD) provides the following guidance:

  1. PREVIOUSLY-SUPPLIED DATA. There is no requirement for any data that has already been supplied to DEM-ERD to be re-submitted in GDA2020 co-ordinates.
  2. ONGOING AND IMMINENT DATA ACQUISITION. The data from any ongoing or imminent acquisition or processing projects using GDA94 co-ordinates should be submitted to DEM using that datum. After August 2019, the acquisition of any new petroleum-related data should be carried out in GDA2020 co-ordinates unless otherwise agreed with DEM-ERD.
  3. REGULATIONS AND GUIDELINES. The Petroleum and Geothermal Energy Regulations and associated Guidelines will be updated in due course to reflect that GDA2020 will be South Australia’s official mapping datum.
  4. LICENCE BOUNDARIES. Following the transition to GDA2020, all new licence boundaries will be described in GDA2020, whilst historical boundaries will be preserved in their original datum.  This is the same philosophy as was adopted during the transition to GDA94
  5. CONVERSION OF EXISTING DATA HELD BY DEM-ERD. ERD will transform selected key datasets from GDA94 to GDA2020 co-ordinates. This will generally be done using the basic seven-parameter transformation (i.e. a distortion grid will not be applied). Other datasets will remain in GDA94 due to the practical constraints of updating the significant volume of data held by ERD. These data can still be loaded into most software correctly by specifying that it uses GDA94 co-ordinates.
  6. ASSISTANCE AND GUIDANCE: For any assistance or guidance during the transition to GDA2020, please contact
  7. PRAGMATIC APPROACH DURING THE TRANSITION PERIOD. Notwithstanding the above, DEM-ERD will take a pragmatic approach to the future supply of co-ordinate data (for example, where a survey crosses into another jurisdiction that has not yet transitioned to GDA2020 as its official datum). In the event of any issues or problems, please contact ERD to discuss how to proceed.

Background information on GDA2020

The co-ordinates of physical locations in Australia (such as wells, seismic lines, pipelines etc.) are currently defined using the Geocentric Datum of Australia 1994 or “GDA94”.  However, Australia sits on one of the Earth’s fastest moving tectonic plates, and by 2020, there will be an error of approximately 1.8m between a location’s GDA94 co-ordinates and its co-ordinates from global satellite positioning systems.  This is because Australia’s GDA94 datum is plate-fixed and moves with the Australian continent whereas GPS co-ordinates are fixed to the centre of the earth.

To bring Australia’s coordinates into line with those from global satellite positioning systems, Australia will soon be changing to a new official national datum called the Geocentric Datum of Australia 2020 or “GDA2020”. The change will affect all users of location-based data.

The transition to GDA2020 is being facilitated by the Intergovernmental Committee on Surveying and Mapping (ICSM) and Geoscience Australia.  For further information, we recommend the following useful links to their websites:

ICSM – Overview of the Geocentric Datum of Australia

ICSM factsheet – co-ordinate transformations between GDA94 and GDA2020

ICSM – all GDA2020 factsheets

Geoscience Australia – Datum Modernisation in Australia